Product category
Level
Magnetic flap and radar level instruments for tanks and vessels.
5 products

Instrumentation / Level
26GHz High-Frequency Radar Level Instrument
The LDRD60XX series sensors are 26G high-frequency radar level measuring instruments with a maximum measuring distance of up to 80 meters. The antenna has been further optimized, and the new high-speed microprocessor enables higher-rate signal analysis and processing, allowing the instrument to be used in: highly complex measurement conditions such as reactors or solid silos. The radar level antenna emits narrow microwave pulses that are transmitted downward through the antenna. When the microwaves contact the surface of the measured medium, they are reflected back, received again by the antenna system, and transmitted to the electronic circuit section for automatic conversion into a level signal (because microwaves propagate extremely fast, the round-trip time for the electromagnetic wave to reach the target and return to the receiver after reflection is almost instantaneous). Note: When using the radar level gauge, make sure the highest material level does not enter the measurement blind zone (the area shown as D in the figure).
View specifications
Instrumentation / Level
Guided Wave Radar Level Meter
The guided wave radar level meter is a radar level meter based on the time-domain reflectometry (TDR) principle. The high-frequency microwave pulses emitted by the guided wave radar propagate along the probe (steel cable or steel rod); upon reaching the measured medium, a sudden change in dielectric constant causes reflection, and part of the pulse energy is reflected back. The time interval between the emitted pulse and the reflected pulse is proportional to the distance to the measured medium. Owing to the use of an advanced microprocessor and the distinctive choDiscovery echo processing technology, the guided wave radar level meter can be applied under various complex operating conditions. Multiple process connection methods and probe types make the HBRD70X series guided wave radar level meters suitable for various complex operating conditions and applications, such as high temperature, high pressure and media with low dielectric constant. Using a pulsed operating mode, the guided wave radar level meter has extremely low emission power and can be installed in various metal and non-metal vessels; it is harmless to people and the environment. H----measuring range, L----empty tank distance, B----top blind zone, E----minimum distance from probe to tank wall. *Note: Reliable measurement of the level in the tank can be ensured only when the material is between the top blind zone and the bottom blind zone.
View specifications
Instrumentation / Level
120 GHz Radar Level Gauge
The LDRD-6120GX produced by our company operates at 120 GHz, which has electromagnetic characteristics in the terahertz band. This gives it characteristics not found in other radar measurement products, such as the ability to penetrate non-polar materials (ray-like properties). In industrial environments with strong adhesion and heavy dust, it offers highly desirable measurement stability and resistance to environmental interference, and requires no purge device. Because it also has a very small antenna beam angle and a strong adaptive automatic gain function, in most cases no aiming device is needed. This makes installation requirements simple and economical in on-site use, and commissioning is quick. The 120G frequency-modulated continuous-wave radar uses a 10 GHz sweep bandwidth, with fast Fourier transform calculation implemented in FPGA chip hardware. Our engineering and technical personnel creatively applied diffracted wave separation and spectrum refinement algorithm implementation technology, enabling measurement accuracy within 50 meters to reach 0.217 mm (theoretical value), and a range resolution of 8 mm for a stationary vertical reflective surface. This product requires only 80 ms to complete a full measurement calculation over a 100 m range.
View specifications
Instrumentation / Level
Magnetic flap level gauge
This magnetic flap level gauge works on the magnetic coupling principle and consists of a main body tube, a float and a magnetic flap indicator panel. Its structure is simple and intuitive, and it provides direct on-site level reading without a power supply. Optional level switches and a 4-20 mA remote transmission transmitter can upload the level signal to a control system. The main body tube is made of 304 stainless steel, resistant to temperature and pressure, and suitable for water, oil and weakly corrosive liquid media. The flaps are red and white: as the level rises the red flaps turn over, and as it falls the white flaps reset, giving clear reading. It can be side-mounted, top-mounted or bottom-mounted, supports flange connection, and an explosion-proof version is optional. It is widely used for level monitoring of storage tanks, reactors, water tanks and other equipment. Custom lengths and materials are supported, customization is available, and supply is stable.
View specifications
Instrumentation / Level
Radar Level Gauge
This high-frequency radar level gauge uses high-frequency microwave pulse technology for non-contact measurement. It is not affected by medium temperature, pressure, foam or dust, offers high measurement accuracy, is wear-free and requires little maintenance. It is equipped with an LCD backlit display showing level, ullage and volume; supports 4-20mA and pulse output, with optional RS485 Modbus and HART protocols. Antenna options include horn, rod and parabolic types; the housing is aluminum alloy; flanges are available in 304/316L stainless steel; protection rating IP67; explosion-proof versions available. Suitable for storage tanks, silos, reactors, wastewater tanks and similar applications, and can measure liquids, slurries and granular materials. Custom measuring ranges and antenna types available; customizable and stable supply.
View specifications
