Skip to content
LANRUN
GGD product image 1
GGD product image 1
GGD product image 2
GGD product image 3

Low-voltage series

GGD

The GGD AC low-voltage distribution cabinet is suitable for AC 50Hz distribution systems with a rated operating voltage of 400V and a rated operating current up to 6300A in power plants, substations, industrial and mining enterprises and other power users, for the conversion, distribution and control of electrical energy for power, lighting and distribution equipment. The GGD AC low-voltage distribution cabinet is a new type of low-voltage distribution cabinet designed in accordance with the requirements of the competent authorities of the Ministry of Energy, power users and design departments, and on the principles of safety, economy, rationality and reliability. The product features high breaking capacity, good dynamic and thermal stability, flexible electrical schemes, convenient combination, series design, strong practicality, novel structure and a high degree of protection. It can be used as a replacement product for low-voltage switchgear assemblies. The GDD low-voltage distribution cabinet complies with the following standards: IEC61439 Low-voltage switchgear and controlgear assemblies; GB/T7251.12-2013 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies, and other standards.

Request a quote

Please provide your operating conditions, quantity and required connection or output.

Technical details

Specifications from source material

The GGD AC low-voltage distribution cabinet is suitable for AC 50Hz distribution systems with a rated operating voltage of 400V and a rated operating current up to 6300A in power plants, substations, industrial and mining enterprises and other power users, for the conversion, distribution and control of electrical energy for power, lighting and distribution equipment. The GGD AC low-voltage distribution cabinet is a new type of low-voltage distribution cabinet designed in accordance with the requirements of the competent authorities of the Ministry of Energy, power users and design departments, and on the principles of safety, economy, rationality and reliability. The product features high breaking capacity, good dynamic and thermal stability, flexible electrical schemes, convenient combination, series design, strong practicality, novel structure and a high degree of protection. It can be used as a replacement product for low-voltage switchgear assemblies. The GDD low-voltage distribution cabinet complies with the following standards: IEC61439 Low-voltage switchgear and controlgear assemblies; GB/T7251.12-2013 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies, and other standards.

Rated operating voltage Ue (V)
400, 660
Rated operating current InA (A)
≤ 6300
Rated frequency fn (Hz)
50/60
Rated insulation voltage Ui (V)
660, 690, 1000
Rated short-time withstand current Icw (kA)
50, 80, 100
Rated peak withstand current Icw (kA)
105, 176, 220
Rated impulse withstand voltage Uimp (kV)
6
Overvoltage category
IV
Pollution degree
3
Electrical clearance
≥ 10mm
Creepage distance
≥ 12.5mm
Degree of protection
(customizable for special requirements) IP30, IP40, IP41, IP42
Incoming cabinet and feeder cabinet
Height (mm) 2200

Full product details

Overview

The GGD AC low-voltage distribution cabinet is suitable for AC 50Hz distribution systems with a rated operating voltage of 400V and a rated operating current up to 6300A in power plants, substations, industrial and mining enterprises and other power users, for the conversion, distribution and control of electrical energy for power, lighting and distribution equipment. The GGD AC low-voltage distribution cabinet is a new type of low-voltage distribution cabinet designed in accordance with the requirements of the competent authorities of the Ministry of Energy, power users and design departments, and on the principles of safety, economy, rationality and reliability. The product features high breaking capacity, good dynamic and thermal stability, flexible electrical schemes, convenient combination, series design, strong practicality, novel structure and a high degree of protection. It can be used as a replacement product for low-voltage switchgear assemblies. The GDD low-voltage distribution cabinet complies with the following standards: IEC61439 Low-voltage switchgear and controlgear assemblies; GB/T7251.12-2013 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies, and other standards.

Operating environment

1. The ambient air temperature shall not exceed +40°C and shall not be lower than -5°C. The average temperature within 24h shall not exceed +35°C. 2. For indoor installation and use, the altitude of the installation site shall not exceed 2000m. 3. The relative humidity of the ambient air shall not exceed 50% at a maximum temperature of +40°C; higher relative humidity is permissible at lower temperatures (for example, 90% at +20°C). 4. The possible occasional effects of condensation due to temperature changes shall be taken into account. 5. The inclination of the equipment relative to the vertical shall not exceed 5° during installation. 6. The equipment shall be installed in locations free from severe vibration and shock, and in locations where the electrical components are not subject to corrosion. *Note: When users have special requirements, these can be resolved through consultation with the manufacturer.

Technical parameters

Rated operating voltage Ue (V): 400, 660; Rated operating current InA (A): ≤ 6300; Rated frequency fn (Hz): 50/60; Rated insulation voltage Ui (V): 660, 690, 1000; Rated short-time withstand current Icw (kA): 50, 80, 100; Rated peak withstand current Icw (kA): 105, 176, 220; Rated impulse withstand voltage Uimp (kV): 6; Overvoltage category: IV; Pollution degree: 3; Electrical clearance: ≥ 10mm; Creepage distance: ≥ 12.5mm; Degree of protection: (customizable for special requirements) IP30, IP40, IP41, IP42

Dimensions

Incoming cabinet and feeder cabinet: Height (mm) 2200; Width (mm) 600, 800, 1000; Depth (mm) 600, 800, 1000

Product features

Main busbar: Copper busbars generally use copper material with a content of 99.9%; prototypes are manufactured according to this specification and have passed type tests. According to pre-calculated data, the busbars are bent with a busbar processing machine; the bending angle shall not be too small for the busbar specification, cracks are not permitted at the bends, and the bend heights of horizontally arranged busbars shall be consistent. The ends of the busbars are embossed, and after embossing, labels are applied to indicate phase sequence. Structural features: The cabinet body of the GGD AC low-voltage distribution cabinet adopts the general-purpose cabinet form; the frame is made of 8MF cold-formed steel sections by partial welding or assembled from C-shaped steel; the frame parts and special matching parts are supplied as a set by a designated steel section manufacturer to ensure the precision and quality of the cabinet body. The parts of the general-purpose cabinet are designed on the modular principle and have 20-module mounting holes. This provides high versatility, short production cycles and improved work efficiency. 1. The design of the GGD cabinet fully takes into account heat dissipation during operation. Different numbers of ventilation slots are provided at the upper and lower ends of the cabinet body; when the electrical components in the cabinet generate heat, the heat rises and is discharged through the upper slots, while cool air is continuously supplied into the cabinet through the lower slots, so that the sealed cabinet body forms a natural ventilation path from bottom to top, achieving heat dissipation. 2. The cabinet door is connected to the frame by pivot-type movable hinges, facilitating installation and removal; a mountain-shaped rubber-plastic strip is embedded along the folded edge of the door, which prevents direct collision between the door and the cabinet body and also improves the degree of protection of the door. 3. The instrument door fitted with electrical components is connected to the frame with multi-strand flexible copper wire. The mounting parts inside the cabinet are connected to the frame with knurled screws, so that the entire cabinet forms a complete earthing protection circuit. 4. The top cover of the cabinet body can be removed when necessary, facilitating on-site assembly and adjustment of the main busbar; lifting rings are fitted at the four corners of the cabinet top for hoisting and transport. 5. The degree of protection of the cabinet body is generally IP30; users may also select between IP30 and IP42 according to the requirements of the operating environment.

Related products