Skip to content
LANRUN
MNS product image 1
MNS product image 1
MNS product image 2
MNS product image 3
MNS product image 4

Low-voltage series

MNS

The MNS low-voltage withdrawable switchgear (hereinafter referred to as switchgear) was developed by our company with reference to ABB's MNS cabinet type and comprehensive improvements, and is a relatively advanced low-voltage withdrawable switchgear in China. The product consists of standardized, series-based modules, and the drawers have reliable mechanical interlocking devices, making use safer and more reliable for users. This switchgear is suitable for AC 50(60)Hz, rated voltage 400V, 660V, rated current 6300A and below three-phase five-wire power supply systems, and can be used in power plants, substations, industrial and mining enterprises, buildings and hotels, airports, docks, and radio and television communication centers as control for power generation, transmission and distribution, power conversion and power consumption equipment, and performs reactive power compensation on its main busbar through capacitor compensation cabinets. This series of switchgear complies with national standards: GB/T7251.1 "Low-voltage switchgear and controlgear assemblies - Part 1: General rules", GB/T7251.12 "Low-voltage switchgear and controlgear assemblies - Part 2: Assemblies for power distribution and control", IEC61439 "Low-voltage switchgear and controlgear assemblies".

Request a quote

Please provide your operating conditions, quantity and required connection or output.

Technical details

Specifications from source material

The MNS low-voltage withdrawable switchgear (hereinafter referred to as switchgear) was developed by our company with reference to ABB's MNS cabinet type and comprehensive improvements, and is a relatively advanced low-voltage withdrawable switchgear in China. The product consists of standardized, series-based modules, and the drawers have reliable mechanical interlocking devices, making use safer and more reliable for users. This switchgear is suitable for AC 50(60)Hz, rated voltage 400V, 660V, rated current 6300A and below three-phase five-wire power supply systems, and can be used in power plants, substations, industrial and mining enterprises, buildings and hotels, airports, docks, and radio and television communication centers as control for power generation, transmission and distribution, power conversion and power consumption equipment, and performs reactive power compensation on its main busbar through capacitor compensation cabinets. This series of switchgear complies with national standards: GB/T7251.1 "Low-voltage switchgear and controlgear assemblies - Part 1: General rules", GB/T7251.12 "Low-voltage switchgear and controlgear assemblies - Part 2: Assemblies for power distribution and control", IEC61439 "Low-voltage switchgear and controlgear assemblies".

Ambient temperature
the surrounding air temperature does not exceed +40°C and is not lower than -5°C, and the average value measured within 24 hours does not exceed +35°C. 2
Ambient humidity
clean air, at the highest temperature of +40°C the relative humidity does not exceed 50%
Environmental pollution level
level 3
Note
① If certain electrical components selected cannot meet the above working conditions, the manufacturer and user shall resolve the matter through negotiation. ② When the operating conditions do not match the above working conditions, the user shall raise the matter with the manufacturer for resolution through negotiation
Rated operating voltage Ue (V)
400, 660
Rated operating current InA (A)
≤6300
Rated frequency fn (Hz)
50/60
Rated insulation voltage Ui (V)
660, 690, 1000
Rated short-time withstand current Icw (kA)
50, 80, 100
Rated peak withstand current Icw (kA)
105, 176, 220
Rated impulse withstand voltage Uimp (kV)
6
Overvoltage category
IV
Pollution degree
3
Clearance
≥10mm
Creepage distance
≥12.5mm
Degree of protection
(customizable for special requirements) IP30, IP40, IP41, IP42
Height/mm
Main busbar transition cabinet: 2200
Incoming cabinet and tie cabinet
2200
Width/mm
Main busbar transition cabinet: 400
Incoming cabinet and tie cabinet
600, 800, 1000
Depth/mm
Main busbar transition cabinet: 800, 1000
Incoming cabinet and tie cabinet
800, 1000

Full product details

Overview

The MNS low-voltage withdrawable switchgear (hereinafter referred to as switchgear) was developed by our company with reference to ABB's MNS cabinet type and comprehensive improvements, and is a relatively advanced low-voltage withdrawable switchgear in China. The product consists of standardized, series-based modules, and the drawers have reliable mechanical interlocking devices, making use safer and more reliable for users. This switchgear is suitable for AC 50(60)Hz, rated voltage 400V, 660V, rated current 6300A and below three-phase five-wire power supply systems, and can be used in power plants, substations, industrial and mining enterprises, buildings and hotels, airports, docks, and radio and television communication centers as control for power generation, transmission and distribution, power conversion and power consumption equipment, and performs reactive power compensation on its main busbar through capacitor compensation cabinets. This series of switchgear complies with national standards: GB/T7251.1 "Low-voltage switchgear and controlgear assemblies - Part 1: General rules", GB/T7251.12 "Low-voltage switchgear and controlgear assemblies - Part 2: Assemblies for power distribution and control", IEC61439 "Low-voltage switchgear and controlgear assemblies".

Operating environment

1. Ambient temperature: the surrounding air temperature does not exceed +40°C and is not lower than -5°C, and the average value measured within 24 hours does not exceed +35°C. 2. Ambient humidity: clean air, at the highest temperature of +40°C the relative humidity does not exceed 50%; at lower temperatures a higher relative humidity is permitted, for example 90% at +20°C, but considering temperature changes, moderate condensation may occasionally occur. 3. The temperature range of -25°C to +55°C applies to transport and storage, and +70°C may be reached for a short time (≤24h). 4. Altitude not exceeding 2000 m. 5. Seismic intensity not exceeding 8 degrees. 6. Environmental pollution level: level 3. Note: ① If certain electrical components selected cannot meet the above working conditions, the manufacturer and user shall resolve the matter through negotiation. ② When the operating conditions do not match the above working conditions, the user shall raise the matter with the manufacturer for resolution through negotiation.

Technical parameters

Rated operating voltage Ue (V): 400, 660; Rated operating current InA (A): ≤6300; Rated frequency fn (Hz): 50/60; Rated insulation voltage Ui (V): 660, 690, 1000; Rated short-time withstand current Icw (kA): 50, 80, 100; Rated peak withstand current Icw (kA): 105, 176, 220; Rated impulse withstand voltage Uimp (kV): 6; Overvoltage category: IV; Pollution degree: 3; Clearance: ≥10mm; Creepage distance: ≥12.5mm; Degree of protection: (customizable for special requirements) IP30, IP40, IP41, IP42

Dimensions

Height/mm: Main busbar transition cabinet: 2200; Incoming cabinet and tie cabinet: 2200. Width/mm: Main busbar transition cabinet: 400; Incoming cabinet and tie cabinet: 600, 800, 1000. Depth/mm: Main busbar transition cabinet: 800, 1000; Incoming cabinet and tie cabinet: 800, 1000.

Product features

The MNS cabinet frame is made of imported high-quality aluminum-zinc coated steel sheet or high-quality cold-rolled steel sheet bent into parts, fastened and connected to each other by self-tapping locking screws or hexagon screws, and then according to scheme changes, corresponding doors, cover plates, partitions, mounting brackets, as well as busbars, functional units and other parts are added to assemble a complete device. The dimensions of parts and compartment dimensions within the device are modularized (module unit E = 25mm). As a new generation low-voltage withdrawable switchgear, it has the following features: 1. Reasonable structure and high technical level. The rated current-carrying capacity, breaking capacity, and dynamic and thermal stability performance indicators of the MNS switchgear are higher than those of other types of low-voltage switchgear, and maintenance is convenient, safe and reliable. 2. Good protection performance. MNS is a fully isolated switchgear, and the internal compartments meet the provisions of IEC439-1 "Form 4"; the enclosure degree of protection is IP30, IP31, IP40, IP41, IP42. 3. The basic frame of the low-voltage switchgear is a combined assembly structure; the cabinet cover plates use high-quality cold-rolled steel sheet, and all frames, internal partitions and functional units use high-quality imported aluminum-zinc coated steel sheet. During shearing, the aluminum-zinc coating automatically covers the cut edge along with the shearing blade, so the cut edge has strong self-healing ability and will not corrode or rust. The remaining metal structural parts of the cabinet made of cold-rolled sheet are galvanized for corrosion protection. 4. The low-voltage switchgear uses C-shaped straight columns, assembled by steel self-tapping screws and grade 8.8 bolts. It has sufficient mechanical strength to ensure that components do not shake or deform after installation and during operation. Each cabinet in the switchgear is divided into three compartments, namely the horizontal busbar compartment, the functional unit compartment and the cable compartment, and the compartments are separated from each other by solid high-strength flame-retardant environmentally friendly plastic functional boards and aluminum-zinc coated steel sheets.

Related products