


Low-voltage series
JP Cabinet
The JP integrated distribution box is a new type of integrated control box combining power distribution, metering, protection, control and reactive power compensation. It is used in substations, factories, industrial and mining enterprises, large power plants, petroleum and chemical enterprises, large steel mills, high-rise building power centers, reactive power compensation, metering, power distribution and other applications. The JP low-voltage integrated distribution box conforms to the following standards: IEC 439-1 Low-voltage switchgear and controlgear assemblies; GB 7251.12 Low-voltage switchgear and controlgear assemblies - Part 2: Assemblies for power distribution and control; GB/T 15576 Low-voltage reactive power compensation assemblies.
Request a quotePlease provide your operating conditions, quantity and required connection or output.
Technical details
Specifications from source material
The JP integrated distribution box is a new type of integrated control box combining power distribution, metering, protection, control and reactive power compensation. It is used in substations, factories, industrial and mining enterprises, large power plants, petroleum and chemical enterprises, large steel mills, high-rise building power centers, reactive power compensation, metering, power distribution and other applications. The JP low-voltage integrated distribution box conforms to the following standards: IEC 439-1 Low-voltage switchgear and controlgear assemblies; GB 7251.12 Low-voltage switchgear and controlgear assemblies - Part 2: Assemblies for power distribution and control; GB/T 15576 Low-voltage reactive power compensation assemblies.
- Altitude
- ≤2000 m. 2
- Ambient temperature
- -25 °C to +40 °C, with an average temperature within 24 h of ≤+35 °C
- Atmospheric conditions
- clean air, relative humidity not exceeding 50% at a maximum temperature of +40 °C
- Tilt from the vertical
- not more than 5 degrees. 5
- Surrounding environment
- pollution degree 3, seismic intensity below 9
- Rated operating voltage (Ue)
- V 230, 380
- Rated operating current (In)
- A ≤800
- Rated frequency (Fn)
- Hz 50
- Rated insulation voltage (Ui)
- V 660
- Rated short-time withstand current (Icw)
- kA 15, 25
- Rated peak withstand current (Icw)
- kA 40, 52.5
- Rated impulse withstand voltage (Uimp)
- kV 8
- Overvoltage category
- IV
- Pollution degree
- 3
- Clearance
- ≥10 mm
- Creepage distance
- ≥14 mm
- Degree of protection
- (customizable for special requirements) IP44, IP45
Full product details
Overview
The JP integrated distribution box is a new type of integrated control box combining power distribution, metering, protection, control and reactive power compensation. It is used in substations, factories, industrial and mining enterprises, large power plants, petroleum and chemical enterprises, large steel mills, high-rise building power centers, reactive power compensation, metering, power distribution and other applications. The JP low-voltage integrated distribution box conforms to the following standards: IEC 439-1 Low-voltage switchgear and controlgear assemblies; GB 7251.12 Low-voltage switchgear and controlgear assemblies - Part 2: Assemblies for power distribution and control; GB/T 15576 Low-voltage reactive power compensation assemblies.
Operating Environment
1. Altitude: ≤2000 m. 2. Ambient temperature: -25 °C to +40 °C, with an average temperature within 24 h of ≤+35 °C; the lower limit of ambient air temperature is -25 °C in temperate regions and -50 °C in severe cold regions. 3. Atmospheric conditions: clean air, relative humidity not exceeding 50% at a maximum temperature of +40 °C; higher relative humidity is permitted at lower temperatures, for example 90% at +20 °C, but moderate condensation may occasionally occur due to temperature changes. 4. Tilt from the vertical: not more than 5 degrees. 5. Surrounding environment: pollution degree 3, seismic intensity below 9; the equipment should be installed in locations free from severe vibration and impact and where electrical components are not readily subject to corrosion. *Note: Special requirements can be resolved through consultation with the manufacturer.
Technical Parameters
Rated operating voltage (Ue): V 230, 380; Rated operating current (In): A ≤800; Rated frequency (Fn): Hz 50; Rated insulation voltage (Ui): V 660; Rated short-time withstand current (Icw): kA 15, 25; Rated peak withstand current (Icw): kA 40, 52.5; Rated impulse withstand voltage (Uimp): kV 8; Overvoltage category: IV; Pollution degree: 3; Clearance: ≥10 mm; Creepage distance: ≥14 mm; Degree of protection: (customizable for special requirements) IP44, IP45
Dimensions
Height (mm) 800~1800; Width (mm) 900~1700; Depth (mm) 400~900
Product Features
The JP low-voltage integrated distribution box consists of the enclosure, switch-fuse group, molded-case circuit breaker, residual current circuit breaker, isolator, fuse, composite switch, capacitor, automatic reactive power compensation controller, copper busbar, N busbar, PE busbar, PVC-insulated conductors, insulators and other components. The enclosure is formed from stainless steel by integral bending and partial welding, and the exterior can be powder-coated. 1. Auxiliary circuit insulated conductor wiring method: insulated conductors bundled with spiral wrapping tube and secured with cable ties; 2. Prototype operation mode: manual or automatic; 3. Prototype mounting method: suspended mounting; 4. Prototype installation location: indoor or outdoor; 5. Anti-corrosion measures: the enclosure uses stainless steel sheet, and internal metal accessories use a galvanizing process, providing corrosion resistance.
