




High-voltage series
YB Series Box-Type Substation
Box-type substation, also called prefabricated substation or prefabricated transformer station. It is a factory-prefabricated indoor/outdoor compact distribution device in which high-voltage switchgear, distribution transformers and low-voltage distribution equipment are arranged as a unit according to a certain wiring scheme; that is, the functions of transformer step-down and low-voltage distribution are organically combined and installed in a moisture-proof, rust-proof, dust-proof, rat-proof, fire-proof, theft-proof, heat-insulating, fully enclosed, movable steel structure enclosure. It is particularly suitable for urban network construction and renovation, and is a new type of substation that has emerged after civil-construction substations. Box-type substations are suitable for mines, factories and enterprises, urban public buildings, residential areas, expressways, oil and gas fields and wind power stations. They replace the original civil-construction distribution rooms and distribution stations, becoming a new type of complete power distribution device.
Request a quotePlease provide your operating conditions, quantity and required connection or output.
Technical details
Specifications from source material
Box-type substation, also called prefabricated substation or prefabricated transformer station. It is a factory-prefabricated indoor/outdoor compact distribution device in which high-voltage switchgear, distribution transformers and low-voltage distribution equipment are arranged as a unit according to a certain wiring scheme; that is, the functions of transformer step-down and low-voltage distribution are organically combined and installed in a moisture-proof, rust-proof, dust-proof, rat-proof, fire-proof, theft-proof, heat-insulating, fully enclosed, movable steel structure enclosure. It is particularly suitable for urban network construction and renovation, and is a new type of substation that has emerged after civil-construction substations. Box-type substations are suitable for mines, factories and enterprises, urban public buildings, residential areas, expressways, oil and gas fields and wind power stations. They replace the original civil-construction distribution rooms and distribution stations, becoming a new type of complete power distribution device.
- Ambient air temperature
- upper limit +40°C, lower limit -10°C in general areas. 2
- Altitude
- 1000 m. 3
- Humidity
- relative humidity: daily average not more than 95%, monthly average not more than 90%. 4
- Water vapor pressure
- daily average not more than 2.2 kPa, monthly average not more than 1.8 kPa. 5. Condensation may occur when temperature drops sharply, accompanied by pollution. This product is suitable for the following two environmental conditions that are harsher than normal conditions. a. Infrequent condensation (not more than twice per month on average) with light pollution. b. Generally no condensation (not more than twice per month on average) with relatively severe pollution. 6. Locations without fire or explosion hazards and without severe pollution or gases sufficient to corrode metals and damage insulation. 7. Locations without severe vibration, jolting, and with vertical inclination not exceeding 8°
- Note
- * Storage and transport at -30°C are permitted. In areas with altitude above 2000 m, handle according to the Technical Requirements for High-Voltage Apparatus for Plateau Use under Special Environmental Conditions (GB/T 20635-2006). When altitude does not exceed 2000 m, low-voltage auxiliary equipment requires no measures. When actual service conditions differ from the above, the user and manufacturer shall negotiate
- Rated operating voltage
- kV 12
- Rated capacity
- kVA 630
- Rated frequency
- Hz 50
- Rated short-time withstand current
- kA 30
- Rated peak withstand current
- kA 63
- Rated short-time power-frequency withstand voltage
- kV/1min 42
- Rated lightning impulse withstand voltage
- kV 75
- Rated short-time power-frequency withstand voltage (across open contacts)
- kV/1min 48
- Rated lightning impulse withstand voltage (across open contacts)
- kV 85
Full product details
Overview
Box-type substation, also called prefabricated substation or prefabricated transformer station. It is a factory-prefabricated indoor/outdoor compact distribution device in which high-voltage switchgear, distribution transformers and low-voltage distribution equipment are arranged as a unit according to a certain wiring scheme; that is, the functions of transformer step-down and low-voltage distribution are organically combined and installed in a moisture-proof, rust-proof, dust-proof, rat-proof, fire-proof, theft-proof, heat-insulating, fully enclosed, movable steel structure enclosure. It is particularly suitable for urban network construction and renovation, and is a new type of substation that has emerged after civil-construction substations. Box-type substations are suitable for mines, factories and enterprises, urban public buildings, residential areas, expressways, oil and gas fields and wind power stations. They replace the original civil-construction distribution rooms and distribution stations, becoming a new type of complete power distribution device.
Operating Environment
1. Ambient air temperature: upper limit +40°C, lower limit -10°C in general areas. 2. Altitude: 1000 m. 3. Humidity: relative humidity: daily average not more than 95%, monthly average not more than 90%. 4. Water vapor pressure: daily average not more than 2.2 kPa, monthly average not more than 1.8 kPa. 5. Condensation may occur when temperature drops sharply, accompanied by pollution. This product is suitable for the following two environmental conditions that are harsher than normal conditions. a. Infrequent condensation (not more than twice per month on average) with light pollution. b. Generally no condensation (not more than twice per month on average) with relatively severe pollution. 6. Locations without fire or explosion hazards and without severe pollution or gases sufficient to corrode metals and damage insulation. 7. Locations without severe vibration, jolting, and with vertical inclination not exceeding 8°. Note: * Storage and transport at -30°C are permitted. In areas with altitude above 2000 m, handle according to the Technical Requirements for High-Voltage Apparatus for Plateau Use under Special Environmental Conditions (GB/T 20635-2006). When altitude does not exceed 2000 m, low-voltage auxiliary equipment requires no measures. When actual service conditions differ from the above, the user and manufacturer shall negotiate.
Technical Parameters
Rated operating voltage: kV 12; Rated capacity: kVA 630; Rated frequency: Hz 50; Rated short-time withstand current: kA 30; Rated peak withstand current: kA 63; Rated short-time power-frequency withstand voltage: kV/1min 42; Rated lightning impulse withstand voltage: kV 75; Rated short-time power-frequency withstand voltage (across open contacts): kV/1min 48; Rated lightning impulse withstand voltage (across open contacts): kV 85; Protection degree IP44 (customizable)
Dimensions
Height/mm 2500; Width/mm 6600; Depth/mm 2200
Product Features
Owing to its distinctive external structure, the box-type substation features space saving, ease of relocation, convenient maintenance and low losses. The box-type substation is also called a combined box-type substation; its enclosure consists of a high-voltage room, a low-voltage room and a transformer room. A compact box-type substation can place the three distribution rooms in the same enclosure, while an independent-type box-type substation can place them separately in different enclosures. The low-voltage room generally has a low-voltage incoming cabinet, low-voltage outgoing feeders and a low-voltage compensation cabinet; its distribution devices consist of low-voltage circuit breakers, current transformers, ammeters, voltmeters, etc. The high-voltage room of the box-type substation generally has a high-voltage incoming cabinet, high-voltage outgoing cabinet, high-voltage metering cabinet or high-voltage ring main unit; its distribution devices include high-voltage load switches, high-voltage fuses and surge arresters, and it can perform switching on and off and has overload and short-circuit protection. The high-voltage distribution device has five-prevention measures: preventing mistaken opening and closing of switchgear, pulling and closing disconnectors under load, hanging grounding wires on live circuits, closing with grounding wires connected, and personnel mistakenly entering live compartments. Main features: 1. The enclosure has two layout configurations, one in a "日" shape and one in a "品" shape. 2. It has the functions of electrical energy detection, display and metering, and can implement corresponding protection functions. 3. A dedicated grounding conductor is provided, with a clear grounding mark. 4. Resistant to floods, pollution, condensation and frost, and corrosion. 5. Small volume, compact structure, simple installation and convenient operation. 6. A live-line indicator can be installed to alert operators that the line is live. 7. The enclosure top generally adopts a layered structure with thermal insulation material inside. 8. The enclosure adopts various forms such as natural air cooling and automatically controlled forced air cooling. 9. Multiple enclosure materials are available: ordinary steel with military green, mirror stainless steel, stainless steel with military green. 10. Enclosure protection degree IP44; customizable for special requirements.
